Page 1 of 1

New (to me) stuff on Tom Wegener's site

Posted: Wed Nov 07, 2018 11:49 am
by GeoffreyLevens
Just went to Tom's site to check what he does on length for prone alaia. Found this on a "new" model pretty interesting
https://www.tomwegenersurfboards.com/mo ... ie-board-0

Plus updated info and new models on his other prone craft
https://www.tomwegenersurfboards.com/mo ... ellyboards

Re: New (to me) stuff on Tom Wegener's site

Posted: Wed Nov 07, 2018 12:20 pm
by Uncle Grumpy
A long conversation with Tom at a Sacred Craft event several years ago is what led to my getting hooked on the Alaia type boards.
If you ride prone, you sould have at least one.

Re: New (to me) stuff on Tom Wegener's site

Posted: Fri Apr 12, 2019 3:06 am
by krusher74
Plus updated info and new models on his other prone craft
https://www.tomwegenersurfboards.com/mo ... ellyboards[/quote]

That's very interesting I had not seen his updated board :o

What's very interesting to me is that when I did my first board 6 years ago I basically took his hull design from the seaglass tuna https://www.theinertia.com/surf/tom-weg ... ss-projec/ and applied to a bodyboard sized template.

so it's very exciting to see that when he has applied his designs to this now shorter "bodyboard" he has basically come up with the design I have been riding.

He even has the half chine rail I ended up with which was initially forced as it was the way to make the rail shaping flow better, and after it worked so well i kept it.

Not sure what he talking about with reverse rocker though, a friends bodyboard warped to reverse rocker and all it did was try to nose dive. :?

Re: New (to me) stuff on Tom Wegener's site

Posted: Fri Apr 12, 2019 7:53 am
by zensuni
krusher74 wrote:Plus updated info and new models on his other prone craft
https://www.tomwegenersurfboards.com/mo ... ellyboards
[/quote]

The "big wave surfie" looks interesting, although I find that mixing foam and wood is a strange idea.

Re: New (to me) stuff on Tom Wegener's site

Posted: Sat Apr 13, 2019 7:46 am
by bgreen
There's nothing particularity strange about a composite design.
I had one made by Tom but have only surfed it in very small conditions. I'm planning to surf it over Easter. Mine has a cork deck, wood bottom.
BWS-bottom.jpg
BWS-deck.jpg
BWS_foil.jpg
BWS_tailView.jpg
I have another composite board that if foam and cork. A fun board but a tad thin.
HU_deck.png

Re: New (to me) stuff on Tom Wegener's site

Posted: Sat Apr 13, 2019 10:49 am
by krusher74
zensuni wrote:
krusher74 wrote:Plus updated info and new models on his other prone craft
https://www.tomwegenersurfboards.com/mo ... ellyboards
The "big wave surfie" looks interesting, although I find that mixing foam and wood is a strange idea.[/quote]

If you see cork as foam and wood as fiberglass then all you have is the natural forerunner of the toxic version we gravitated too.

Re: New (to me) stuff on Tom Wegener's site

Posted: Sat Apr 13, 2019 10:56 am
by krusher74
bgreen wrote:There's nothing particularity strange about a composite design.
I had one made by Tom but have only surfed it in very small conditions. I'm planning to surf it over Easter. Mine has a cork deck, wood bottom.
BWS-bottom.jpg
BWS-deck.jpg
BWS_foil.jpg
BWS_tailView.jpg
I have another composite board that if foam and cork. A fun board but a tad thin.
HU_deck.png
Thanks for the plan pictures of toms design, IMO it looks to be very much leaning towards speeds down the line at the sacrifice or maneuverability.

I would like to try my own design in cork and paulownia, on initial thoughts a difficult board to make :? hard to get the bottom contours as I would like them from on the wood.

Re: New (to me) stuff on Tom Wegener's site

Posted: Sun Apr 14, 2019 3:47 pm
by bgreen
The Indonesian photo suggested that as well but that was also what I was looking for. I could ask about a wider shaper, more curved outline.

Re: New (to me) stuff on Tom Wegener's site

Posted: Mon Apr 15, 2019 3:09 am
by zensuni
krusher74 wrote:If you see cork as foam and wood as fiberglass then all you have is the natural forerunner of the toxic version we gravitated too.
"In the middle of the board there is a thin layer of XPS foam and on the top and bottom there are two layers of 2mm paulownia veneer."
Sounds like foam more than cork.
Having said that, I have nothing against composite designs, it is just something I have never considered (beeing not a shaper) :) .

Re: New (to me) stuff on Tom Wegener's site

Posted: Sun Apr 28, 2019 3:44 am
by bgreen
I recently rode the board in 3-4+ waves. It drew a nice line and turned easy enough. It had a lot of flex.
krusher74 wrote:
bgreen wrote: Thanks for the plan pictures of toms design, IMO it looks to be very much leaning towards speeds down the line at the sacrifice or maneuverability.