First ever

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
1handclapping
Tube master
Posts: 14
Joined: Mon Oct 20, 2014 2:46 am
City: Wooloweyah
State or Province: NSW
Country: Australia

First ever

#1

Unread post by 1handclapping »

Merry Christmas to all paipo riders out there.
Just finished glassing my first ever attempt at making a board.
Really enjoyed the process but found the glassing stressful.
I have been checking this forum for a couple of years and have gained some great ideas.
Thanks to all that has shared.
I have been riding Dick Ash boards now for a couple of years love the way they go lots of flex but weren't as durable as I would like.
I got a local board builder to make me a board which was a disaster far to much volume it was like a cork really hard to duck dive.
After thinking and designing in my mind I decided to have a go.
Found some foam insulation foam at a hardware shop which was 1200 x 600 x 30 on special for $12.
Worked out a shape cut it out shaped the rails and nose. I did not have much to play with for nose rocker but got a bit out of it.
The board is 45x19 approx 1inch thick but less in parts as I have dished out the deck.
I used 1 layer 6oz on the bottom and 2x6oz on the deck and used epoxy.
That's about as technical I can get.
It's been a journey looking forward to paddling out.
Attachments
image.jpg
image.jpg (22.63 KiB) Viewed 7274 times
image.jpg
image.jpg (23.9 KiB) Viewed 7274 times
User avatar
bgreen
Big Wave Charger
Posts: 1232
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz
Contact:

Re: First ever

#2

Unread post by bgreen »

Hello 1handclapping,

How's things? Where do you plan to surf it? I look forward to hearing how it goes.

All the best,

Bob
1handclapping
Tube master
Posts: 14
Joined: Mon Oct 20, 2014 2:46 am
City: Wooloweyah
State or Province: NSW
Country: Australia

Re: First ever

#3

Unread post by 1handclapping »

Thanks Bob I surf Angourie both sides depending on wind and crowds but there are plenty of other set ups close by.
I am going to go finless to see how it goes. I have a pair of fins from another board that I plan to shape down to knubster keel style which will give me a bit of hold on the inside section at the point.
soulglider
Big Wave Charger
Posts: 267
Joined: Sat Dec 17, 2011 10:32 am
City: sd
State or Province: ca
Country: usa

Re: First ever

#4

Unread post by soulglider »

its a goodie, mate!
deathbedpaipo.blogspot.com
jbw4600
Big Wave Charger
Posts: 289
Joined: Sat Nov 05, 2011 6:08 pm
City: Kentfield
State or Province: CA
Country: USA
Location: Fairfax, CA
Contact:

Re: First ever

#5

Unread post by jbw4600 »

Looks like fun. A guy at one of my surf spots made a prone board out that kind of foam. He seemed to have a good time.
User avatar
krusher74
Big Wave Charger
Posts: 842
Joined: Wed Nov 07, 2012 3:53 pm
City: easkey
State or Province: co sligo
Country: Ireland
Interests: Surfing, vintage cars and motorbikes
Location: Easky, Co sligo , ireland
Contact:

Re: First ever

#6

Unread post by krusher74 »

congratulations on a first board build!

Does it turn at all with that very straight rail, or track in a straight line?
1handclapping
Tube master
Posts: 14
Joined: Mon Oct 20, 2014 2:46 am
City: Wooloweyah
State or Province: NSW
Country: Australia

Re: First ever

#7

Unread post by 1handclapping »

Got a go out at back point today small 1metre but real happy with the new board.
I was able to bottom turn and get the rail set with ease.
Happy with that I ventured to the right hand point which was breaking a bit more solid and got one ball tearer of a wave.
Paddled back out took off on a peaky insider made the drop and got a speedy run along the face then it closed in front of me not being tethered lost the board which was heading to life and death luckily it didn't end on the rocks so a leg rope plug is being fitted before next go out.
Totally rapt in my homemade piapo.
User avatar
bgreen
Big Wave Charger
Posts: 1232
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz
Contact:

Re: First ever

#8

Unread post by bgreen »

L,

Good to hear it went well in some juice. Do you have any more photos?

Bob
1handclapping
Tube master
Posts: 14
Joined: Mon Oct 20, 2014 2:46 am
City: Wooloweyah
State or Province: NSW
Country: Australia

Re: First ever

#9

Unread post by 1handclapping »

Surfed back beach yesterday 1.5 peaks going both ways my board went great love being finless.
Might be different on the point at 2m.
Bob if you ever get down this way be good to catch up.
Attachments
image.jpg
image.jpg
User avatar
bgreen
Big Wave Charger
Posts: 1232
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz
Contact:

Re: First ever

#10

Unread post by bgreen »

L,

Doesn't look like a lot of nose lift. Does it flex?
At Easter, I'll be less than an hour north. I'm staying for a week and had discussed with Ian meeting up and surfing around MW.

Bob
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests