Search found 184 matches
- Sun Dec 09, 2018 12:30 am
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
I do not like the paipos without fins, nor the bodyboard, I hate the lateral displacements and skids The side slipping you described might be due to the board being quite large. If you try a finless board that is narrower and longer you will see that the inside rail actually behaves like a fin as l...
- Wed Dec 05, 2018 3:40 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
I have read this link carefully, I have drawn the paipo I had thought to 19. I prefer 18 to work better in vertical wind waves ,,, so I modified the plan to this measure, has the previous paipo's construction and a pod of Fiberglass reinforcement since I'm going to get into waves of 2m and I do not ...
- Tue Dec 04, 2018 10:05 am
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
Second day in the water. very happy, I have learned to go up the waves without needing the volume and the flotation, a great advance, has entered series of 1.5m and I have been able to overcome the waves very easy, so I do not need more volume, enchanted table design: siemto 21 very wide, I have a t...
- Mon Dec 03, 2018 5:28 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
first day of test. When I got into the water, I had problems with the minimum flotation of the wooden paipo, I have never had anything like that. I've gotten used to it, but I miss something more floating. Frankenboogie has good ideas, I'm thinking about 1 inch of eva when I have taken waves it has ...
- Mon Dec 03, 2018 8:34 am
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
Communication even between English speakers can be difficult. I've had people in NZ, Canada and the US not be able to understand me. It's often helpful to translate something and then translate it back into the original language and see if it makes sense. Rod and I have done a couple of bi-lingual ...
- Sun Dec 02, 2018 7:02 am
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
I have seen this carbon fiber. laminated directly with the hotcoat: carbon fiber + polyester + paraffin, I think I can lighten the weight.
Vector Net XP 227 - 1/2" Diamond Pattern (50cm)
I do not know if with this carbon cloth I will have such good results compared to 6oz fiberglass
Vector Net XP 227 - 1/2" Diamond Pattern (50cm)
I do not know if with this carbon cloth I will have such good results compared to 6oz fiberglass
- Sat Dec 01, 2018 1:50 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
these are some image captures for which you can not see the video
- Sat Dec 01, 2018 1:41 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
GeoffreyLevens Bob, I think he meant that it needed glass because he cut it out so that the grain runs across the width of the board to increase flex; but that weakens it considerably so--glass. I really like the look of the flex in the video/FB link. Nice and springy. perfect, that's what I wanted ...
- Sat Dec 01, 2018 12:33 am
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
Do you use google translate? yes, unfortunately I have no ability to learn English, I have tried . I have dyslexia, this gives me a very restless mind with a lot of creativity, but it prevents me from writing and reading. I can not have everything in life, I'm happy as I am I'm not sure what you mea...
- Fri Nov 30, 2018 5:29 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
to get the rocker and that flex I have to cut the wood in contraction direction to the feed, if I do not give fiberglass part by just touching it,
I do not like the paipos without fins, nor the bodyboard, I hate the lateral displacements and skids
I do not like the paipos without fins, nor the bodyboard, I hate the lateral displacements and skids
- Fri Nov 30, 2018 12:53 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
Re: paulownia + polyester+ fiberglass: rocker and flex
it's already finished, I'm a little afraid of the weight, it's been 4kg counting the fins and everything. Will it float enough? I have to find a way to lighten
You can remove the fiberglass and resin and paste a thin sheet of melamine, synthetic wood imitation veneer and many colors to make furniture
You can remove the fiberglass and resin and paste a thin sheet of melamine, synthetic wood imitation veneer and many colors to make furniture
- Thu Nov 29, 2018 4:51 pm
- Forum: Paipo Board Design & Building
- Topic: paulownia + polyester+ fiberglass: rocker and flex
- Replies: 48
- Views: 15024
paulownia + polyester+ fiberglass: rocker and flex
First paipo prototype made in paulowia polyester and fiberglass. It has been much better than expected I want to thank Sergi Flama Galanó and Patxi Navarro for their great help and all of you from the forum that make it so great the paipo is a 44x21.5x18mm of paulowia on a single board, I put it on ...
- Wed Nov 28, 2018 8:10 pm
- Forum: Paipo Board Design & Building
- Topic: Frankenboogie Mk. III
- Replies: 24
- Views: 11522
Re: Frankenboogie Mk. III
At the time of design I was confused in the orientation of the veins of the wood to make it look more beautiful. but thanks to this failure, I already have the first idea all the alaias and paipos I have seen have the longitudinal vein, this gives rigidity and flex in thin boards, but what happe...
- Wed Nov 28, 2018 5:14 pm
- Forum: Paipo Board Design & Building
- Topic: Frankenboogie Mk. III
- Replies: 24
- Views: 11522
Re: Frankenboogie Mk. III
Atlantasurfer: your paipo has been a great inspiration for me, thank you very much for buying your ideas, it is serious, you have a great mindAtlantasurfer wrote:I can't wait to see what you come up with. I'm sure someone around here has good advice for bending Paulownia.
- Wed Nov 28, 2018 9:27 am
- Forum: Paipo Board Design & Building
- Topic: Frankenboogie Mk. III
- Replies: 24
- Views: 11522
Re: Frankenboogie Mk. III
I would like to rescue these ideas for me. I can buy paulownia boards in 15, 18 and 22mm, the 18 and 22mm boards allow me to put fcs fusion plugs, I want my paipos with fins. The weight of the paipo that has been designed in 18mm thickness is 2.5kg in 22mm it has 3kg. it's the good thing about 3d bu...
- Tue Nov 27, 2018 4:35 am
- Forum: Paipo Board Design & Building
- Topic: Vinyl Flooring Rolls + xps?
- Replies: 6
- Views: 2368
Re: Vinyl Flooring Rolls + xps?
HMPE. Ptex, Durasurf type 4001... ? I have been looking at these materials in the forum and it seems that no one has worked with the foundations of the skis and snows, that black sheet. there are many colors I leave this idea for a while impossible, I have not had good experiences. I do not erase th...
- Fri Nov 23, 2018 2:18 pm
- Forum: Paipo Board Design & Building
- Topic: Vinyl Flooring Rolls + xps?
- Replies: 6
- Views: 2368
Re: Vinyl Flooring Rolls + xps?
The plastics have not stuck well. Neither with the tail nor with epoxy. At least with epoxy it was hard. But nothing reliable. The padding that has a plastic has not absorbed resin that was the idea he had. Cork Curious only Cork with xps and epoxy has been brutal. It sticks incredible but easy part...
- Thu Nov 22, 2018 5:46 am
- Forum: Paipo Board Design & Building
- Topic: Vinyl Flooring Rolls + xps?
- Replies: 6
- Views: 2368
Re: Vinyl Flooring Rolls + xps?
First idea I can not can stick the thin plastic with glue. the glue leaves a lot of lumps and it shows in the plastic. Any idea how to apply this contact queue without lumps?
- Wed Nov 21, 2018 7:03 pm
- Forum: Paipo Board Design & Building
- Topic: Vinyl Flooring Rolls + xps?
- Replies: 6
- Views: 2368
Re: Vinyl Flooring Rolls + xps?
I have glued different materials with adequate contact glue to the xps and the same ones but glued with epoxy, now it is wet, tomorrow when it is all dry I will do tests of gluing and hardness
- Wed Nov 21, 2018 3:50 am
- Forum: Paipo Board Design & Building
- Topic: Vinyl Flooring Rolls + xps?
- Replies: 6
- Views: 2368
Vinyl Flooring Rolls + xps?
good morning, I've been in a tool store for home, unintentionally I've stumbled over a huge rolls of plastic, vinyl ... there are many colors shapes and materials. I have seen 2 different compounds. 1) only plastic. this could paste it to the xps with contact lola apt for the eps / xps, in the same ...