Page 1 of 1
Wanting to build my first board and not sure about size
Posted: Fri Aug 08, 2014 9:15 pm
by sdennan
Hi Everyone
I am looking at building my first board. I live in New Zealand and hit Whangamata for summer.
Im a bit unsure about the size of board I would require. I am 49, 6 foot 3 tall and weigh a massive 140kg. I have done a lot of bodysurfing in the past, there is a lot of body to surf now days.
Could someone suggest a possible length and width that would be suitable.
Mahalo
Simon
Re: Wanting to build my first board and not sure about size
Posted: Fri Aug 08, 2014 11:24 pm
by bgreen
Foam or wood?
Re: Wanting to build my first board and not sure about size
Posted: Fri Aug 08, 2014 11:58 pm
by sdennan
Paulownia
Re: Wanting to build my first board and not sure about size
Posted: Sat Aug 09, 2014 7:07 am
by bgreen
Sd,
Unless you are thinking of something chambered/hollow keep in mind wood paipo or bellyboards are low buoyancy boards.
Some suggestions.
1) 3/4 of your height?
2)
http://www.paipo.com/products/paipo-xl-plus.html The big boards are only 40" and would be ridden by some big guys.
3) I recently saw a wood board, built for a big Polynesian guy and it was more like 50" and wider.
You may have to build a couple of boards before you get it right.
Others may have more specific or helpful suggestions.
Enjoy the bar.
Bob
Re: Wanting to build my first board and not sure about size
Posted: Sat Aug 09, 2014 3:21 pm
by karuhi
giday Simon, do you ever head up north? I've a couple of boards I've made that would float you. drop me a line if you are interested. you're more than welcome to have a go. I'm not quite your size 126kgs but either of these boards would be fine. cheers - Justin
justingee@xtra.co.nz
Re: Wanting to build my first board and not sure about size
Posted: Sun Aug 10, 2014 4:19 am
by krusher74
You could also add some cork decking to add buoyancy
Re: Wanting to build my first board and not sure about size
Posted: Sat Nov 08, 2014 7:18 pm
by Papa Paepo o
Aloha krusher74,
Like what Bob stated, 2/3 of your height.And what I found out is adding shoulder width (point to point) adding 2'in. would give you a starting point on your layout on the board, before cutting and shaping. Then make yourself a template and with that, you can play with your template while making your board lay-out in or out on any size board you want to design.
- plain wood style