New Deck Pad from Covepads

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
jbw4600
Big Wave Charger
Posts: 289
Joined: Sat Nov 05, 2011 6:08 pm
City: Kentfield
State or Province: CA
Country: USA
Location: Fairfax, CA
Contact:

New Deck Pad from Covepads

Unread post by jbw4600 » Thu Oct 02, 2014 8:55 pm

I just test rode my board with my new deck pad for the second time today. The pad is 3/16" thick. It works great with plenty of grip. No need for wax. It felt pretty good. But it definitely adds float to the board . Casey from Covepads.com told me that he don't notice added float on kneeboards. But those boards are around 6 feet and the pad isn't as big. So the relative increase in volume is less than it is on a small paipo. So now this board doesn't duck dive as well. I plan on using this board on point breaks and where there isn't alot of duck diving.

I am building a new board right now. It is alot thinner about 1 7/8". (I kind of goofed. I used an electric planner on a foam board for the first time.) I am making it thinner so I can add pad on that board and get less float. I don't think it is a good idea to add a pad as an afterthought. You have to design the board with the idea of putting a pad on it. He also makes 5/16" pads. I am not sure which one I' ll use next.


;
'
Attachments
WP_20141002_17_02_20_Pro__highres.jpg
WP_20141002_17_02_34_Pro__highres.jpg

karuhi
Big Wave Charger
Posts: 51
Joined: Mon Dec 30, 2013 5:07 pm
City: hokianga harbour
State or Province: northland
Country: new zealand
Interests: surfing,diving,fishing,boating,hunting.........
Location: hokianga harbour - whirinaki New Zealand
Contact:

Re: New Deck Pad from Covepads

Unread post by karuhi » Thu Oct 02, 2014 10:01 pm

I've also got one on one of mine, i really like it, yes it probably adds a bit of float - i don't really know having put the pad on before its maiden voyage.But i think in my case its more to do with the boards nose holding as much volume as a longboard :lol: . I've found it a great pad and certainly far superior to the camping mat one i made. great grip and cushioning. I'll be buying again

User avatar
rodndtube
Big Wave Charger
Posts: 1029
Joined: Thu Aug 18, 2011 10:34 pm
City: Arbutus Land
State or Province: Maryland
Country: USA
Interests: Waveriding, travel and the Paipo Research Project
Location: Maryland, USA & Where the Waves Are Breaking
Contact:

Re: New Deck Pad from Covepads

Unread post by rodndtube » Thu Oct 02, 2014 11:02 pm

Any idea how these deck pads interact with just a rash guard and baggies? Looks like I would trim at least an inch more around the rails.

JBW, how long and wide is the board pictured above?
rodNDtube
"Prone to ride"
I love my papa li`ili`i

"The sea doth wash away all human ills."
-- Euripides.

jbw4600
Big Wave Charger
Posts: 289
Joined: Sat Nov 05, 2011 6:08 pm
City: Kentfield
State or Province: CA
Country: USA
Location: Fairfax, CA
Contact:

Re: New Deck Pad from Covepads

Unread post by jbw4600 » Fri Oct 03, 2014 2:45 pm

I think it would work just fine with a rash guard and shorts. The pad is an inch inside the outline of the board (as traced on a piece of paper). I was worried about the pad being that close, but that is what Casey recommends. So far I don't I haven't buried the rail deep enough for it to be a problem. I don't know if boards actually bury that deep anyway. I think the water pressure from below keeps that part of the board out the water and rides on top of the water instead of inside it. We will see, when I ride some more tubular waves.

I am more concerned about this issue with my new board, which will be about 3/8-1/2 inch thinner and with thinner rails. I am shaping the rails this weekend. I'll have to talk with him.

The board in the photo is about 21 1/2 inches wide by 52 inches long by about 3/8 to 1/2 " thick.

User avatar
nomastomas
Big Wave Charger
Posts: 515
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: New Deck Pad from Covepads

Unread post by nomastomas » Fri Oct 03, 2014 8:29 pm

Very nice! Looks really cool. Great insight about thinking everything through before building. I learned to only reduce thickness to within 1/8" with the power planer. You'll loose at least that much hand-finishing.
"This is a paipo site...isn't it?"
www.tp4surf.com

jbw4600
Big Wave Charger
Posts: 289
Joined: Sat Nov 05, 2011 6:08 pm
City: Kentfield
State or Province: CA
Country: USA
Location: Fairfax, CA
Contact:

Re: New Deck Pad from Covepads

Unread post by jbw4600 » Sun Oct 05, 2014 1:30 pm

yes





I really need a planner lesson. I made the nose a little too thin. It is hard to do the deck foil on a square block of foam. It will still be pretty good. Luckily each blank only costs about $18.00.












i

User avatar
nomastomas
Big Wave Charger
Posts: 515
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: New Deck Pad from Covepads

Unread post by nomastomas » Sun Oct 05, 2014 8:12 pm

I shape my bottom first, getting the rocker I want, and then bring the deck down to the desired thickness. Leave about 1/2" of thickness at the very tip. This will be rounded off, 1/4 round from the bottom and 1/4 round from the deck. On a belly board, I would use a 24"x 3.5" sanding block with 40g paper(basically a 2x4 with a sanding belt glued on the bottom). You get that last 12" of rocker curve by making 4, full-width passes with the block; first pass from 12" up, second pass from 9", third pass from 6" and last pass from 3". Repeat until you have the desired curve. Using a power planer requires a specific technique that is too hard to describe and is best demonstrated. You might be able to find a video on the web. Back to Cove Pads!
"This is a paipo site...isn't it?"
www.tp4surf.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest