TBG5

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
User avatar
rodndtube
Big Wave Charger
Posts: 1158
Joined: Thu Aug 18, 2011 10:34 pm
City: Arbutus Land
State or Province: Maryland
Country: USA
Interests: Waveriding, travel and the Paipo Research Project
Location: Maryland, USA & Where the Waves Are Breaking
Contact:

Re: TBG5

#61

Unread post by rodndtube »

rodndtube wrote: The US is very low on the bodyboarding spectrum--it has substantially diminished over the past decade or two. I would also say the mainland USA surfing community is very segregated and antagonistic towards each other. I notice this especially with USA foot surfers bringing their attitudes to overseas countries.

A lot of the bodyboarders in PR have stringers. My son couldn't really ride his US boogie board down there because it would turn into mush.
There are not that many paipos/bellyboarders (or kneeboarders) for that matter, but they tend to become lumped in with bodyboarders (proneriders). Okay, we should include surf mats and maybe handboards, too. All of these folks are established minorities... and in some places are treated as such. Quite frankly, I don't encounter this "discrimination" in PR, CR and Hawaii. Not much in Northern Oregon nor in Central California. Along the Space Coast there just isn't much outside of SUPs, longboards and shortboards, but I have bumped into some paipo riders, including a hydrofoil paipo guy, over the years. I bumped into a paipo guy when I surfed one day in N. Oregon. So... what is all this rambling about here and this part of the thread? A shared experience riding prone and varying materials and design characteristics. I certainly welcome Nomas's design/shaping expertise--he is a student of the "conflict of design" and can speak intelligently about it as a shaper. But we are all learning all of the time and bring to our learning experience a set of our own biases and preferences based upon our own personal experiences and how we like to ride.

P.S. And, Nels, you better start a new thread on bodyboarding (boogie!) before I get into trouble!!! :lol:
rodNDtube
"Prone to ride"
I love my papa li`ili`i

"The sea doth wash away all human ills."
-- Euripides.
Nels
Big Wave Charger
Posts: 254
Joined: Tue Nov 29, 2011 3:58 pm
City: Camarillo
State or Province: California
Country: USA

Re: TBG5

#62

Unread post by Nels »

Heh heh...sorry about the semi-hijack there, back to nomastomas and his TGB5 and onward...
CHRISPI
Big Wave Charger
Posts: 340
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: TBG5

#63

Unread post by CHRISPI »

Gee I fell so isolated, I did not realize I was such a minority??
belly rider
Big Wave Charger
Posts: 111
Joined: Thu Jul 31, 2014 5:33 pm
City: Florence
State or Province: Tuscany
Country: Italy
Interests: A True Passion for Paipo & Kneeboards
Location: Italy

Re: TBG5

#64

Unread post by belly rider »

rodendtube comment I certainly welcome Nomas's design/shaping expertise--he is a student of the "conflict of design" and can speak intelligently about it as a shaper. But we are all learning all of the time and bring to our learning experience a set of our own biases and preferences based upon our own personal experiences and how we like to ride.

Hear Hear totally agree 150% well worded good statement
its all about the ride
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#65

Unread post by nomastomas »

Yeah, if you're not learning your not growing. Case in point: My Aussie customer raved about the improved performance of his new quad G5 when using only the rear fins. Now, this guy is an experienced body boarder who prone-rides in waves of consequence. I have to pay attention to his feedback. Prone boards are pretty much surfed and turned off the wave-side, rear corner. Makes sense that that is where the pivot point for turns should be. AND, why not enhance that twinnie set-up with a canard fin placed forward of the main fin, a.k.a. Twinzer? Had to try it....
G5_Twinzer_Small.JPG
G5_Twinzer_Small.JPG (151.82 KiB) Viewed 167281 times
Surf was pretty pathetic, but I got enough "facetime" to appreciate the possiblities. In smaller, crappy waves, like this test day, hold is not an issue while speed an responsiveness are. Board speed was probably equal to the quad set-up, but turns were quicker/snappier. Now I'm thinking that I should modify my quad set-ups to go with the larger fin in the rear and the smaller fin in the front. Use wave size to determine how much total fin area is needed for desired hold, and varying front and rear fin size according to desire for more responsiveness; much smaller front for more pivot-y feel, and just slightly smaller front for more drive and projection (But always keeping the largest fin in the rear).
"This is a paipo site...isn't it?"
www.tp4surf.com
asier esnal
Big Wave Charger
Posts: 184
Joined: Tue Apr 24, 2018 4:56 am
City: Astigarraga
State or Province: Gipuzkoa
Country: spain

Re: TBG5

#66

Unread post by asier esnal »

When you see your keel system, it reminded me of the typical windsurfing mounts in the quad system. small fins front and big back.

there is a lot of information about this on the internet, it gives fresh air and many ideas to study other modalities

That paipo has a design that excites me. congratulations

in this photo also appears the system of 2 central fins, which has me crazy
Attachments
quatro-w800.jpg
quatro-w800.jpg (174.43 KiB) Viewed 167268 times
Nels
Big Wave Charger
Posts: 254
Joined: Tue Nov 29, 2011 3:58 pm
City: Camarillo
State or Province: California
Country: USA

Re: TBG5

#67

Unread post by Nels »

Windsurfing is pretty near dead around me, couldn't tell you the last time I saw a windsurfer. Everything is kitesurfing. Until these posts I literally have never seen that particular 2 + 2 fin configuration.

Of course I'm a surf-hermit so that probably isn't good for expanding the horizons...

Nels
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#68

Unread post by nomastomas »

This is a minor progression in the G5 line. I moved the twin fin cluster almost 1.5" towards the rear and added a set of FCS plugs to accommodate a "Nubster" or other trailing fin. The twin mods came from feedback I received from an Austrailian customer and the trailer was a request from a customer in Florida, who spent a lot of time on Twinnies in his "younger" pre-knee surgery days.
Attachments
G5_twin.JPG
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#69

Unread post by nomastomas »

Here is the G5 bottom and outline adapted to a 5-11 kneeboard. Owner liked it so much, that he ordered a second one with 1/4" less thickness. As a shaper, I really enjoy the applicability of this design. I could imagine a 5ft'er for you guys who enjoy the "mega" prone board approach.
Attachments
G5_Kneeboard.JPG
G5_Kneeboard.JPG (44.87 KiB) Viewed 166754 times
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
bgreen
Big Wave Charger
Posts: 1232
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz
Contact:

Re: TBG5

#70

Unread post by bgreen »

Hello Nomas,

How is the finless branch of the family tree going?

Bob
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#71

Unread post by nomastomas »

Go to the FX thread for an update....
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#72

Unread post by nomastomas »

The G5 has become my goto board on OH+ days. Ease of duck-diving is the primary reason, and, with no need to get to my feet, steep and/or late take-offs are much more manageable. In the past, I've been plague by excessive lift in larger surf, but I think I've discovered a solution. It occurred to me that the planing efficiency of this shape, while beneficial in small waves, becomes detrimental in larger, more powerful waves. The mini-Simmons stand-up shape has the same issues. So, with this in mind, I decided to introduce more drag to the shape by increasing the fin size. I'm currently using True Ames Twin Fins (5.25"x5") placed in the read quad boxes of my G5, with a small 1" canard fin placed in the rear slot of the front fin box. My research showed no precise location for the canard fin, other than forward of the big fin and maybe an inch or so away. The idea remains the same: the canard cleans up the flow of water across the foiled side of the larger fin, reducing cavitation and loss of hold.
Twinzer-esque setup
Twinzer-esque setup
Twinzer.JPG (104.35 KiB) Viewed 166474 times
My experience has been that the fin set up reduces skipping, almost eliminating it. It also reduces speed, bringing it down to a more manageable and controlled level. Instead of losing sight of every thing watery speed blur, punctuated by body slams, I was able to enjoy the ride. Turns are very pivoty and precise, as would be expected from the larger fin, set in the rear corner. Hold was excellent, allowing me to go anywhere on the wave face, for as long as I wanted. I also found that it was easier to get around any whitewater. Usually, if the wave breaks in front of me, I get stuck being pushed side-ways by the whitewater (really bad on the finless GFX) There was more opportunity to get back on the face with the large twin fins.
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
rodndtube
Big Wave Charger
Posts: 1158
Joined: Thu Aug 18, 2011 10:34 pm
City: Arbutus Land
State or Province: Maryland
Country: USA
Interests: Waveriding, travel and the Paipo Research Project
Location: Maryland, USA & Where the Waves Are Breaking
Contact:

Re: TBG5

#73

Unread post by rodndtube »

Thank you for sharing the update.
rodNDtube
"Prone to ride"
I love my papa li`ili`i

"The sea doth wash away all human ills."
-- Euripides.
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#74

Unread post by nomastomas »

Here's the latest G5...it boasts a whopping 40L volume to accommodate a 300# rider. I had to exceed the prescribed length by 2 in in order to achieve the desired volume. Dimensions are 52" length, 23.5" width and 2.5" thick at centerline (thickness at rail is close to 3") Using Aku allows me to shape to very specific dimensions, including volume, while maintaining the G5's basic design features. While there is some distortion caused by the camera angle, the impact of increasing thickness does cause an increase in the depth of the beveled-rail concave. I don't beleive this will have any negative impact on performance.
Attachments
G5_BB_40L_3.JPG
G5_BB_40L_3.JPG (82.29 KiB) Viewed 166315 times
G5_BB_40L_2.JPG
G5_BB_40L_2.JPG (130.5 KiB) Viewed 166315 times
G5_BB_40L_1.JPG
G5_BB_40L_1.JPG (138.67 KiB) Viewed 166315 times
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
krusher74
Big Wave Charger
Posts: 842
Joined: Wed Nov 07, 2012 3:53 pm
City: easkey
State or Province: co sligo
Country: Ireland
Interests: Surfing, vintage cars and motorbikes
Location: Easky, Co sligo , ireland
Contact:

Re: TBG5

#75

Unread post by krusher74 »

It's hard to tell from the pictures but with those tail concaves does the G5 have a lot of tail rocker?
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#76

Unread post by nomastomas »

Not an easy question to answer....about 1" at the centerline. But, then there is a great deal of "V" in the tail, so there is a lot more rocker out at the rail. A board with no rocker is fast, but resists turning. The rider has to weigh the tail to bring the rail out of the water in order to turn. Weighing the tail causes the board to stall and loose speed. Rocker makes the board easier to turn because the curve automatically frees the nose rail. Some would argue that V isn't needed in such a small shape, but I've found that it really shortens the turning radius. With a board that has no V, the rocker out at the rail is identical to the rocker at the centerline. But, what V does is to progressively increase the rocker at the rail so that the farther the board goes over on rail, the more rocker curve and the tighter the turnin. The concaves become progressively deeper as they extend through the tail. I'm sure this would also change the rocker curve as the board is rolled over onto the rail.
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
bgreen
Big Wave Charger
Posts: 1232
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz
Contact:

Re: TBG5

#77

Unread post by bgreen »

Here's another approach to riding choppy waves:

https://www.swellnet.com/news/design-ou ... -stop-four
User avatar
krusher74
Big Wave Charger
Posts: 842
Joined: Wed Nov 07, 2012 3:53 pm
City: easkey
State or Province: co sligo
Country: Ireland
Interests: Surfing, vintage cars and motorbikes
Location: Easky, Co sligo , ireland
Contact:

Re: TBG5

#78

Unread post by krusher74 »

Tomas: was just trying to compare rocker to my own designs seeing mine have about 1/4" yours at 1" would be a lot to me, I wonder how much tail rocker a bodyboard bends to from its static 0.

I can't say I have really noticed the chop/skipping think at all, either my boards don't do it, I dampen it with my shoulder or I just don't perceive it.
User avatar
nomastomas
Big Wave Charger
Posts: 597
Joined: Thu Nov 17, 2011 2:30 am
City: Ojai
State or Province: CA
Country: USA
Interests: Surfing, cycling and fishing
Location: Ojai, CA
Contact:

Re: TBG5

#79

Unread post by nomastomas »

I don't believe that rocker has anything directly to do with lift. If anything, rocker slows a board down when going in a straight line. Your shapes tend to be smaller (less planing area) than mine. You may have come upon a combination of volume and planing area for your weight that, while fast, doesn't generate enough speed to lift the board and you out of the water. That's what I'm trying to achieve with the G6. I suspect that your new groveler will skip in larger waves.
"This is a paipo site...isn't it?"
www.tp4surf.com
User avatar
krusher74
Big Wave Charger
Posts: 842
Joined: Wed Nov 07, 2012 3:53 pm
City: easkey
State or Province: co sligo
Country: Ireland
Interests: Surfing, vintage cars and motorbikes
Location: Easky, Co sligo , ireland
Contact:

Re: TBG5

#80

Unread post by krusher74 »

nomastomas wrote: Thu May 16, 2019 11:43 am I don't believe that rocker has anything directly to do with lift. If anything, rocker slows a board down when going in a straight line. Your shapes tend to be smaller (less planing area) than mine. You may have come upon a combination of volume and planing area for your weight that, while fast, doesn't generate enough speed to lift the board and you out of the water. That's what I'm trying to achieve with the G6. I suspect that your new groveler will skip in larger waves.
So do stand up boards skip (larger planning area), or Is that dampened with bending of the knees? i feel if you flowing along on rail you are not on a lrge enough flat area to skip, I have seen video of Greenough skipping horribly on his spoon. its looked like the large amount of nose belly just made that think rear up like a boat and take off,like when you try to go fast in a speed boat in choppy seas
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests