How to add plywood skegs to a finless plywood board ?

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.

How to add plywood skegs to a finless plywood board ?

Unread postby zensuni » Fri Dec 28, 2018 6:46 pm

Along the sessions, I realize that my finless plywood board is great in small, nice peeling waves, but sometimes when the waves get bigger, when they section, when I need to do some quick turns, then the board lacks some control. No real side slipping issue, but it turns by drifting more than biting the wave.
Maybe I could get some extra control by adding one or two small skegs ?
I know how to make the skegs in plywood, but I wonder how to attach them to the board. Glue ? Epoxy resin ? Screws ?
User avatar
zensuni
Big Wave Charger
 
Posts: 190
Joined: Wed Feb 24, 2016 3:58 pm
City: Bordeaux
State or Province: Aquitaine
Country: France

Re: How to add plywood skegs to a finless plywood board ?

Unread postby asier esnal » Fri Dec 28, 2018 7:12 pm

Gorilla glue
Attachments
Original Gorilla Glue_1_0-1 copy_2.png
Original Gorilla Glue_1_0-1 copy_2.png (326.25 KiB) Viewed 270 times
asier esnal
Big Wave Charger
 
Posts: 171
Joined: Tue Apr 24, 2018 4:56 am
City: Astigarraga
State or Province: Gipuzkoa
Country: spain

Re: How to add plywood skegs to a finless plywood board ?

Unread postby bgreen » Sat Dec 29, 2018 3:11 pm

I've never tried to do this, but there have been a variety of approaches:
See, question 3: http://mypaipoboards.org/interviews/Dav ... 0716.shtml

Q 21 - looks like fibreglassed in: http://mypaipoboards.org/interviews/Bry ... 0113.shtml

These look set into the wood and likley glassed as well:
http://mypaipoboards.org/interviews/Bar ... 1130.shtml

Question 4 - fibreglass - http://mypaipoboards.org/interviews/Col ... 0605.shtml

Originally nailed from the deck & glassed.
http://mypaipoboards.org/interviews/Lei ... 0914.shtml
User avatar
bgreen
Big Wave Charger
 
Posts: 1021
Joined: Fri Aug 19, 2011 5:17 pm
City: Brisbane
State or Province: Qld
Country: Oz

Re: How to add plywood skegs to a finless plywood board ?

Unread postby GeoffreyLevens » Sun Dec 30, 2018 10:55 am

Gorilla Glue is sturdy stuff but you MUST clamp very well because it expands a lot as it reacts. And it goes off fast so be ready for that.
GeoffreyLevens
Big Wave Charger
 
Posts: 346
Joined: Sat Sep 17, 2011 9:58 am
Location: Paonia, Colorado
City: Paonia
State or Province: Colorado
Country: USA

Re: How to add plywood skegs to a finless plywood board ?

Unread postby kage » Mon Dec 31, 2018 2:07 pm

Why not glass them?
kage
Big Wave Charger
 
Posts: 79
Joined: Fri Aug 19, 2011 2:48 pm
Location: Santa Cruz
City: Santa Cruz
State or Province: CA
Country: USA

Re: How to add plywood skegs to a finless plywood board ?

Unread postby asier esnal » Tue Jan 01, 2019 7:26 am

kage wrote:Why not glass them?


when two woods are glued, as a rule the glue has to be more elastic than wood, if it is glued with polyester or epoxy, it flexes with the bending

es
cuando se pegan 2 maderas, por norma la cola tiene que ser mas elástica que la madera, si se pega con poliéster o epoxy, este con la flexión se resquebraja
asier esnal
Big Wave Charger
 
Posts: 171
Joined: Tue Apr 24, 2018 4:56 am
City: Astigarraga
State or Province: Gipuzkoa
Country: spain


Return to Paipo Board Design & Building

Who is online

Users browsing this forum: No registered users and 1 guest