Mini paipo

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
User avatar
zensuni
Big Wave Charger
Posts: 210
Joined: Wed Feb 24, 2016 3:58 pm
City: Bordeaux
State or Province: Aquitaine
Country: France

Mini paipo

Unread post by zensuni » Tue Oct 29, 2019 6:44 am

Hi there!
I have been playing with the idea of riding very small boards, smaller than regular paipos but bigger than regular handplanes.
So I came with this one:
test.png
test.png (732.24 KiB) Viewed 3372 times
The size is approximatively 30x45cm, 2cm tick plywood. No concave, no rocker.
The rounded shape makes it very easy to use.
Depending of the wave, I can use it with both hands on it in front of me (if I need more glide), I can go one hand like a handplane, or I can grab it like a mini bodyboard in hollow sections.
It definitely has less speed than my regular bigger paipo board, but it still has enough to make waves, and the feeling of "bodysurfing" is fun, especially in close outs.
I used a foamy handplane recently, this mini paipo works better.
Here is the board in action:
https://youtu.be/P-CHEu7yfgg

kage
Big Wave Charger
Posts: 88
Joined: Fri Aug 19, 2011 2:48 pm
City: Santa Cruz
State or Province: CA
Country: USA
Location: Santa Cruz

Re: Mini paipo

Unread post by kage » Tue Oct 29, 2019 1:43 pm

Looks fun, no rocker?

Nels
Big Wave Charger
Posts: 212
Joined: Tue Nov 29, 2011 3:58 pm
City: Camarillo
State or Province: California
Country: USA

Re: Mini paipo

Unread post by Nels » Tue Oct 29, 2019 3:11 pm

I've played around with these sized boards too...lots of fun! Can be a bit hard on the shoulders and upper arms after a while. They function like the proverbial McDonald's trays. Don't need flex, don't need rocker. Nice to not have a squared off nose thickness though, I got by just sanding a little nose "kick" on the underside of the front of the board. I liked my wood boards better than the mini bodyboard/kickboard at these sizes. Without some kind of strap you have to watch out for the board popping loose and into your face. For that reason alone I never made anything with a pointed or split tail.

These are the easiest boards to make. The only problem is there is literally nothing to break so they last forever. They are fun to make too, so that lcan easily lead to "overpopulation issues". Good times!

Did you seal it with anything? I've used polyurethane varnish, spar urethane, and epoxy resin. All worked fine.

Thumper
Forum Grommet
Posts: 2
Joined: Mon Jun 15, 2020 4:41 am
City: PERTH
State or Province: wa
Country: Australia
Interests: Surfing Guitarlele and Cars

Re: Mini paipo

Unread post by Thumper » Wed Jun 17, 2020 9:47 pm

Just finished a mini paipo similar to yours with a square tail hope to use it this weekend,it’s about double the size of my largest hand plane and about 1/3 the size of a paipo hopefully a bit faster than my hand planes and less pain when it clobbers me like a full size board, don’t know if catchalot is on here I copied one of his designs if this one fails I will make one of his mini coffin boards next.

Poobah
Big Wave Charger
Posts: 215
Joined: Mon Sep 19, 2011 9:46 pm
City: Lucerne
State or Province: CA
Country: USA

Re: Mini paipo

Unread post by Poobah » Thu Jul 30, 2020 12:21 am

Just the sort of topic that will drag Poobah out of his cave. My Royal Egyptian Cubit boards were based on the length of the Pharaoh's forearm, about 20 and 5/8th inches or 525 mm.
IMG_0888.JPG
IMG_0902.JPG
IMG_0902.JPG (54.09 KiB) Viewed 289 times
The nose handle on the blunt nose board has some anti-pearling function, and it makes the board easy to hang onto during a turbulent tumble.
Last edited by Poobah on Thu Jul 30, 2020 1:23 am, edited 1 time in total.

Poobah
Big Wave Charger
Posts: 215
Joined: Mon Sep 19, 2011 9:46 pm
City: Lucerne
State or Province: CA
Country: USA

Re: Mini paipo

Unread post by Poobah » Thu Jul 30, 2020 12:40 am

This one is five pieces of wood. The main experiment here was to have the two stringers protrude from the bottom of the board as stringer fins. I have yet to make a scaled-up version. The nose could sometimes put a lot of water on my face on an angled takeoff.
wicked01.jpg
wicked01.jpg (73.5 KiB) Viewed 288 times
wicked02.jpg
wicked02.jpg (79.48 KiB) Viewed 288 times
Last edited by Poobah on Thu Jul 30, 2020 1:26 am, edited 1 time in total.

Poobah
Big Wave Charger
Posts: 215
Joined: Mon Sep 19, 2011 9:46 pm
City: Lucerne
State or Province: CA
Country: USA

Re: Mini paipo

Unread post by Poobah » Thu Jul 30, 2020 12:45 am

Inspired by that old bellyboard brochure from the fifties. I can't remember the name. The author mentioned the men in Durban riding half-size boards, so I made a 24 inch board (half of a 4 foot Cornish board.)
tootallj.jpg
tootallj.jpg (101.81 KiB) Viewed 288 times

Poobah
Big Wave Charger
Posts: 215
Joined: Mon Sep 19, 2011 9:46 pm
City: Lucerne
State or Province: CA
Country: USA

Re: Mini paipo

Unread post by Poobah » Thu Jul 30, 2020 1:36 am

Then there's the stock shape toilet lid mini paipo, sanitized for your protection.
sanitized.jpg
sanitized.jpg (81.17 KiB) Viewed 283 times

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests