Mini Paipos
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Mini Paipos
Hi everyone, I just stumbled upon this forum in the last few days so am really excited to see some great paipo enthusiast contributing.
I have been on a varied surfing journey riding a wide variety of craft, in more recent times I have been focusing my energy on bodysurfing and construction of handplanes about a year ago I made what I call a mini paipo which is somewhere between a hand plane and a paipo. After having an absolute blast I have since made a few more and varying the dimensions a little. The two shown in the photo are prototypes one is 24" long and the other 20" and both are around 15 1/2" wide with hard edges and deep double concaves. I will post a couple more photos when I get a chance.
If there are any Paipo enthusiast here located on or close to the Gold Coast (Australia) reach out as I know a couple of folk who would be keen to catch up for a session.
cheers
Mercury
I have been on a varied surfing journey riding a wide variety of craft, in more recent times I have been focusing my energy on bodysurfing and construction of handplanes about a year ago I made what I call a mini paipo which is somewhere between a hand plane and a paipo. After having an absolute blast I have since made a few more and varying the dimensions a little. The two shown in the photo are prototypes one is 24" long and the other 20" and both are around 15 1/2" wide with hard edges and deep double concaves. I will post a couple more photos when I get a chance.
If there are any Paipo enthusiast here located on or close to the Gold Coast (Australia) reach out as I know a couple of folk who would be keen to catch up for a session.
cheers
Mercury
-
- Big Wave Charger
- Posts: 107
- Joined: Fri Aug 19, 2011 2:48 pm
- City: Santa Cruz
- State or Province: CA
- Country: USA
- Location: Santa Cruz
Re: Mini Paipos
Greetings Mercury!
nice looking boards I'd like to see the bottoms.
nice looking boards I'd like to see the bottoms.
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
HI Kage
the photo at the bottom is from one of the more recent ones I have built, I am also in the middle of completing a channel bottom.
the photo at the bottom is from one of the more recent ones I have built, I am also in the middle of completing a channel bottom.
-
- Big Wave Charger
- Posts: 75
- Joined: Wed Nov 05, 2014 11:13 pm
- City: Honolulu
- State or Province: Hi.
- Country: USA
- Interests: building & riding Papa Paepo`o (Paipo) Boards. All types and sizes, I even rode a abandon 4'ft - 8'ft. plywood that adrift from a commercial fishing boat in Kewalo Basin, O`ahu in the year of 1996.
- Location: Honolulu,Hi
Re: Mini Paipos
Awesome Mercury Mini's.... would like to see them in some epic surf sessions...
Keep up the good work..... mahalo
Keep up the good work..... mahalo
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
Here is the view created on one of the prototypes recently, the sand through first point at Noosa has been phenomenal
and looking back for riding position, as I mentioned in my first post these boards are somewhere between "riding" a board and bodysurfing with a handplane
and looking back for riding position, as I mentioned in my first post these boards are somewhere between "riding" a board and bodysurfing with a handplane
- bgreen
- Big Wave Charger
- Posts: 1232
- Joined: Fri Aug 19, 2011 5:17 pm
- City: Brisbane
- State or Province: Qld
- Country: Oz
- Contact:
Re: Mini Paipos
Gday Mercury,
I live in Brisbane and usually surf south of the border but with the exception of a few brief windows, haven't made it down that way much in the last couple of years. I grew up on the Gold Coast but rarely surf there. I've been rediscovering the Sunshine Coast and am heading up there for a few days on Sunday.
Global Ernie who occasionally posts here is making a shorter paipo, I just can't recall the length offhand. One photo was about the length of two duckfeet fins.
I'm happy to catch up for a surf but usually steer clear of crowds.
Send me a pm or my email is above the BOAC poster on this site: http://home.brisnet.com.au/~bgreen/bgpage/
Bob
I live in Brisbane and usually surf south of the border but with the exception of a few brief windows, haven't made it down that way much in the last couple of years. I grew up on the Gold Coast but rarely surf there. I've been rediscovering the Sunshine Coast and am heading up there for a few days on Sunday.
Global Ernie who occasionally posts here is making a shorter paipo, I just can't recall the length offhand. One photo was about the length of two duckfeet fins.
I'm happy to catch up for a surf but usually steer clear of crowds.
Send me a pm or my email is above the BOAC poster on this site: http://home.brisnet.com.au/~bgreen/bgpage/
Bob
-
- Big Wave Charger
- Posts: 107
- Joined: Fri Aug 19, 2011 2:48 pm
- City: Santa Cruz
- State or Province: CA
- Country: USA
- Location: Santa Cruz
Re: Mini Paipos
Dang. That is a lot of channels. And a lot of craftsmanship I suspect. Could you say anything about how you arrived at this particular design? Riding characteristics, previous shapes, stuff like that?
- zensuni
- Big Wave Charger
- Posts: 269
- Joined: Wed Feb 24, 2016 3:58 pm
- City: Bordeaux
- State or Province: Aquitaine
- Country: France
Re: Mini Paipos
Nice kickboards !
I like these little planks, simple but efficient.
I usually ride plywood kickboards but yours seem more evolved.
I like these little planks, simple but efficient.
I usually ride plywood kickboards but yours seem more evolved.
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
@bgreen: it would be good to catch up at some stage I sometimes hook up with a bunch of bodysurfers at Narrowneck and we usually find a peak or two to share, a couple of them also ride bellybaord/paipos. They are a group known as Goldiesliders on instagram and have fortnightly meet ups.
@Kage: I based these designs on the handplanes I have been making for the past few years, basically pretty paralell rails and deep concaves and hard edges. The prototypes dimensions were scaled up to fit my arm length, so I could ride with a hand on the nose but I have found the two hands on the deck to be better position for me. The channel bottom idea is more or less the same as a concaves but may have a bit more edge hold on the channels (I cant wait to try it out).
I have been messing about with some other concepts and sizes as well and will post on those as they develop. If you are on instagram and interested you can find me at @hg_mercurysurf
(disclaimer: I am not a commercial operation though I do make small numbers of customs for people who are keen and can wait for extended lead times as I do this in my very limited spare time).
This is a photo of the deck of the channel bottom board with a fresh filler coat from the weekend:
@Kage: I based these designs on the handplanes I have been making for the past few years, basically pretty paralell rails and deep concaves and hard edges. The prototypes dimensions were scaled up to fit my arm length, so I could ride with a hand on the nose but I have found the two hands on the deck to be better position for me. The channel bottom idea is more or less the same as a concaves but may have a bit more edge hold on the channels (I cant wait to try it out).
I have been messing about with some other concepts and sizes as well and will post on those as they develop. If you are on instagram and interested you can find me at @hg_mercurysurf
(disclaimer: I am not a commercial operation though I do make small numbers of customs for people who are keen and can wait for extended lead times as I do this in my very limited spare time).
This is a photo of the deck of the channel bottom board with a fresh filler coat from the weekend:
- bgreen
- Big Wave Charger
- Posts: 1232
- Joined: Fri Aug 19, 2011 5:17 pm
- City: Brisbane
- State or Province: Qld
- Country: Oz
- Contact:
Re: Mini Paipos
Gday M,
I had a fun bank to myself up the sunny coast this morning. I used to go to the spit a bit about 10-12 years but crowds just took the fun out of it.
I'll look at instagram when i get home in a day or so. I need to find my password, its not something iI ook at much.
I had a fun bank to myself up the sunny coast this morning. I used to go to the spit a bit about 10-12 years but crowds just took the fun out of it.
I'll look at instagram when i get home in a day or so. I need to find my password, its not something iI ook at much.
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
I dropped in to my parents place over the weekend and grabbed a couple of photos of a Paulownia paipo I made my mum about 9 years ago. I got the blank from Geoff Moase (RIP) of Dovetail surfboards (an absolutely elite craftsman) and shaped and it up, i refurbished it a bit a couple of years ago with a bit of sanding and re-oiling.
- Attachments
-
- wood bottom 2.jpg (112.33 KiB) Viewed 98946 times
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
I finally got some time to finish off the latest three mini paipos
A custom for a keen fringe (surfmatt, bodysurf, paipo) surfer 24"x15 1/2" and a spare that is up for grabs 20" x 15 1/5"
One Channel bottom for me 25" x 15 1/2"A custom for a keen fringe (surfmatt, bodysurf, paipo) surfer 24"x15 1/2" and a spare that is up for grabs 20" x 15 1/5"
- bgreen
- Big Wave Charger
- Posts: 1232
- Joined: Fri Aug 19, 2011 5:17 pm
- City: Brisbane
- State or Province: Qld
- Country: Oz
- Contact:
Re: Mini Paipos
It will be interesting to hear what difference the bottoms make on this style of board, especially given your riding position isn't on the board as such.
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
This is another one I have been working on with some small Bonzer runners added, this one is EPS and Epoxy with a flax deck and some carbon
with a couple of handplanes I was also glassing
with a couple of handplanes I was also glassing
- zensuni
- Big Wave Charger
- Posts: 269
- Joined: Wed Feb 24, 2016 3:58 pm
- City: Bordeaux
- State or Province: Aquitaine
- Country: France
Re: Mini Paipos
Wow, Nice boards ![Smile :)](./images/smilies/icon_e_smile.gif)
![Smile :)](./images/smilies/icon_e_smile.gif)
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
I was fortunate enough to go and try out the surflake facility in Central Queensland recently and rode my original orange mini paipo it was a great experience and really proved the design concept works well
- bgreen
- Big Wave Charger
- Posts: 1232
- Joined: Fri Aug 19, 2011 5:17 pm
- City: Brisbane
- State or Province: Qld
- Country: Oz
- Contact:
Re: Mini Paipos
So how was it swimming into them? Looks to be a peaky wave.
- Uncle Grumpy
- Big Wave Charger
- Posts: 450
- Joined: Mon Sep 19, 2011 12:57 pm
- City: San Clemente
- State or Province: California
- Country: USA
- Interests: Surfing, Surfboards, Surf History, Fishing, Boats, Dogs, Books
- Contact:
Re: Mini Paipos
Of all the wave machine's around, that one looks the most fun to me.
Looks like you took full advantage.![Cool 8-)](./images/smilies/icon_cool.gif)
Looks like you took full advantage.
![Cool 8-)](./images/smilies/icon_cool.gif)
Paipo surfer in repose,
Nose on the nose,
No grunting he-man pose.
See how fast he goes!
What is it he knows?
Nose on the nose,
No grunting he-man pose.
See how fast he goes!
What is it he knows?
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
HI Bob, It was just like catching a normal wave really, the marshals gave a bit of advice on where to sit in relation to the plunger.
-
- Tube master
- Posts: 21
- Joined: Wed Aug 11, 2021 12:10 am
- City: Tallebudgera
- State or Province: QLD
- Country: Australia
- Interests: surfcraft building, surifng different craft and manufacturing and building techniques
Re: Mini Paipos
here are a couple more I have been working on
The yellow and red mini paipo has a narrower tail and bevelled/chined bottom rails, the checker and flame board is a prize for an upcoming bodysurfing contest (the decal artwork is by Allan Wrath not me).
The yellow and red mini paipo has a narrower tail and bevelled/chined bottom rails, the checker and flame board is a prize for an upcoming bodysurfing contest (the decal artwork is by Allan Wrath not me).
Who is online
Users browsing this forum: No registered users and 188 guests