Futures fin screw
-
- Big Wave Charger
- Posts: 256
- Joined: Tue Nov 29, 2011 3:58 pm
- City: Camarillo
- State or Province: California
- Country: USA
Futures fin screw
I picked up an old Bomb Bellyboard that needs some work. I took out the Futures fins, taped off the box to do some cleanup, took the tape off and now one of the fin screws won't go in very far. I cleaned the hole and blew air through it but to no avail yet. Anybody have any experience with this issue?
Cheers
Nels
Cheers
Nels
- Uncle Grumpy
- Big Wave Charger
- Posts: 450
- Joined: Mon Sep 19, 2011 12:57 pm
- City: San Clemente
- State or Province: California
- Country: USA
- Interests: Surfing, Surfboards, Surf History, Fishing, Boats, Dogs, Books
- Contact:
Re: Futures fin screw
The oils of Peppermint & Wintergreen are both very good penetrants. I'd slather some down in the threads and let it sit over night and try it again. Making sure its free of salt first. If that doesn't work you can take a steel screw of that size(IIRC that's a 10/32, pretty common) and file a groove along the length so it acts like a thread cleaner, or of course, get a tap . The screws that hold most switch plates are that size, use a long one of them to make your thread cutter.
Paipo surfer in repose,
Nose on the nose,
No grunting he-man pose.
See how fast he goes!
What is it he knows?
Nose on the nose,
No grunting he-man pose.
See how fast he goes!
What is it he knows?
-
- Big Wave Charger
- Posts: 101
- Joined: Mon May 14, 2012 1:54 am
- City: Ventura County
- State or Province: california
- Country: usa
- Interests: bike riding, surfing, music
- Location: Oak View, Ca
Re: Futures fin screw
Hey Nels, when you get a chance, I’d like to see a photo of the board…
-
- Big Wave Charger
- Posts: 256
- Joined: Tue Nov 29, 2011 3:58 pm
- City: Camarillo
- State or Province: California
- Country: USA
Re: Futures fin screw
I'll give it all a whack and see what works. Or go finless. But I want to run this with fins. Sigh.
Now lets see if I can figure out posting photos. It's been a while. Flojo didn't you say you had one of these once? I got this from a guy in Santa Paula.
Now lets see if I can figure out posting photos. It's been a while. Flojo didn't you say you had one of these once? I got this from a guy in Santa Paula.
Last edited by Nels on Fri Mar 10, 2023 2:13 pm, edited 1 time in total.
-
- Big Wave Charger
- Posts: 256
- Joined: Tue Nov 29, 2011 3:58 pm
- City: Camarillo
- State or Province: California
- Country: USA
Re: Futures fin screw
Yeah, I'll have to figure out the photos again. Off to the FAQs
-
- Big Wave Charger
- Posts: 101
- Joined: Mon May 14, 2012 1:54 am
- City: Ventura County
- State or Province: california
- Country: usa
- Interests: bike riding, surfing, music
- Location: Oak View, Ca
Re: Futures fin screw
thanks Nels..looks like a fun board. i have never had one..
Who is online
Users browsing this forum: No registered users and 0 guests