My lates Wing board

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
CHRISPI
Big Wave Charger
Posts: 309
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: My lates Wing board

Unread post by CHRISPI » Wed Apr 01, 2015 10:10 am

Yes it is mould core foam from about 10mm thick I think down about 1.50mm it is expensive

SURFFOILS
Big Wave Charger
Posts: 157
Joined: Sat Oct 01, 2011 5:07 am
City: Gold Coast
State or Province: Qld
Country: Australia

Re: My lates Wing board

Unread post by SURFFOILS » Thu Apr 02, 2015 7:43 am

Have you thought about using ply for the foils ? I put 2 layers of 6 oz with epoxy on each side and they're bulletproof. The thinner shape moves thru the water easier too, less volume to push when you paddle. Cheap as too.
------------------------------------------------------------------
surffoil@gmail.com

CHRISPI
Big Wave Charger
Posts: 309
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: My lates Wing board

Unread post by CHRISPI » Fri Apr 03, 2015 2:38 pm

I can’t get my head around working with wood, I do like the hollow wood boards,

CHRISPI
Big Wave Charger
Posts: 309
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: My lates Wing board

Unread post by CHRISPI » Mon Apr 06, 2015 7:39 am

Hi Brett,
When I built my last board the SR72, I put a lot of surface area in the centre of the foil to get it to jump from in the water lift to planning on top lift, it might not make sense but this has become its greatest performance feature. On slower less powerful waves and sections the foil in the water allows me to run high, as speed picks up it pops onto the surface and blasts away on the wing tip, the trim and speed changes are significant but with anticipation and a good grip it has become controllable. The sensation of flight and speed is exhilarating, this board is fun!! . It feels good to have incorporated a performance feature that works.

SURFFOILS
Big Wave Charger
Posts: 157
Joined: Sat Oct 01, 2011 5:07 am
City: Gold Coast
State or Province: Qld
Country: Australia

Re: My lates Wing board

Unread post by SURFFOILS » Tue Apr 07, 2015 6:32 am

Hi Chris, at the moment I'm locked in a fin discussion elsewhere where people don't know the best fin foil for speed !

That's great that you are stoked with the SR72, are you thinking of doing another version?
------------------------------------------------------------------
surffoil@gmail.com

CHRISPI
Big Wave Charger
Posts: 309
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: My lates Wing board

Unread post by CHRISPI » Wed Apr 08, 2015 5:20 am

Brett , do I make sense with my explanation of how important the in the water and on top combination has become, it’s like having a car with lots of torque it pulls from low speed it doesn’t bog down on slow sections, but frees itself when the wave pitches out, the trim change is dramatic but exhilarating .I won’t build for about a year I like to explore the boards performance parameters fully. My next project I want to learn vac bagging on paddles for the boats

SURFFOILS
Big Wave Charger
Posts: 157
Joined: Sat Oct 01, 2011 5:07 am
City: Gold Coast
State or Province: Qld
Country: Australia

Re: My lates Wing board

Unread post by SURFFOILS » Wed Apr 08, 2015 5:56 am

Chris, I understand what you're saying. I'm keen to see what you're planning with the paddles ? What sort of "boats" or are you talking about SUPs ...? :D :D :D
------------------------------------------------------------------
surffoil@gmail.com

CHRISPI
Big Wave Charger
Posts: 309
Joined: Sun Dec 28, 2014 2:48 pm
City: Durban
State or Province: Natals
Country: South Africa

Re: My lates Wing board

Unread post by CHRISPI » Wed Apr 08, 2015 3:39 pm

Sailing outrigger canoe, paddles are as interesting as foils

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest