Mini paipo

What works and what doesn't. Share design ideas, references and contacts for paipo board builders.
User avatar
zensuni
Big Wave Charger
Posts: 206
Joined: Wed Feb 24, 2016 3:58 pm
City: Bordeaux
State or Province: Aquitaine
Country: France

Mini paipo

Unread post by zensuni » Tue Oct 29, 2019 6:44 am

Hi there!
I have been playing with the idea of riding very small boards, smaller than regular paipos but bigger than regular handplanes.
So I came with this one:
test.png
test.png (732.24 KiB) Viewed 351 times
The size is approximatively 30x45cm, 2cm tick plywood. No concave, no rocker.
The rounded shape makes it very easy to use.
Depending of the wave, I can use it with both hands on it in front of me (if I need more glide), I can go one hand like a handplane, or I can grab it like a mini bodyboard in hollow sections.
It definitely has less speed than my regular bigger paipo board, but it still has enough to make waves, and the feeling of "bodysurfing" is fun, especially in close outs.
I used a foamy handplane recently, this mini paipo works better.
Here is the board in action:
https://youtu.be/P-CHEu7yfgg

kage
Big Wave Charger
Posts: 86
Joined: Fri Aug 19, 2011 2:48 pm
City: Santa Cruz
State or Province: CA
Country: USA
Location: Santa Cruz

Re: Mini paipo

Unread post by kage » Tue Oct 29, 2019 1:43 pm

Looks fun, no rocker?

Nels
Big Wave Charger
Posts: 203
Joined: Tue Nov 29, 2011 3:58 pm
City: Camarillo
State or Province: California
Country: USA

Re: Mini paipo

Unread post by Nels » Tue Oct 29, 2019 3:11 pm

I've played around with these sized boards too...lots of fun! Can be a bit hard on the shoulders and upper arms after a while. They function like the proverbial McDonald's trays. Don't need flex, don't need rocker. Nice to not have a squared off nose thickness though, I got by just sanding a little nose "kick" on the underside of the front of the board. I liked my wood boards better than the mini bodyboard/kickboard at these sizes. Without some kind of strap you have to watch out for the board popping loose and into your face. For that reason alone I never made anything with a pointed or split tail.

These are the easiest boards to make. The only problem is there is literally nothing to break so they last forever. They are fun to make too, so that lcan easily lead to "overpopulation issues". Good times!

Did you seal it with anything? I've used polyurethane varnish, spar urethane, and epoxy resin. All worked fine.

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests